DigiTech GeNetX BNX3, Руководство пользователя

Страница: 25 / 82

Sensitivity - The Parameter 4 knob adjusts the sensitivity ( senstvty )of the fretless effect. Higher
values correspond to increased sensitivity to your playing. Range is 0 to 99.
The Parameter 5 knob has no function when the fretless simulator is active.
Wah
Wah is an effect controlled by the Expression Pedal. A Wah applies a boost in gain to a narrow band of
frequencies. As the Expression Pedal is rocked back and forth, the center frequency receiving the boost is
swept up and down making the bass sound as if it is saying “Wah.” The Wah is engaged and disengaged by
applying pressure to the V-Switch located under the toe of the Expression Pedal. See page 67 for more
information regarding the V-Switch.
Wah On/Off - The STATUS button (or the V-Switch) turns the Wah (
Wah
) on and off.
Wah Type - The Parameter 1 knob selects the type of Wah.Values include: Bass Cry (
bass CRY
) is a
bass sounding Wah, Boutique Wah (
BOuTIQUe
) is a wide sweeping Wah with a more
modern sound and Full Range Wah (
fullrang
)sweeps the entire spectrum of audible
frequencies.
Wah Minimum - The Parameter 2 knob is used to select the minimum point the Wah ( WAH MIN ) will
reach in the toe up position of the Expression Pedal. Ranges from 0 to 99 .
Wah Maximum - The Parameter 3 knob is used to select the maximum point the Wah (
WAH MAX
) will
reach in the toe down position of the Expression Pedal. Ranges from 0 to 99 .
The Parameter knobs 4 and 5 don’t function when the Wah module is selected.
Whammy
™
/Synth
This module includes eight types of pitch altering effects:Whammy™, IPS, Detune, Octavider, Synth, Filter,
Envelope, and Pitch Shift. The Status button turns the Whammy™/Synth (
Wham/syn
) module on and off.
The Parameter 1 knob selects whether the module is a Whammy™ (
WHAMMY
), Intelligent Pitch Shifter
(
IPS
), Detuner (
DETUNE
), Pitch Shifter (
PITCH
), Octavider (
octavide
), Synth (
synth
), Formant Filter
(
filter
), or Envelope Filter (
envelope
). Parameters 1, 2, 3, and 4 in the Matrix have different functions
depending upon which effect is selected in this module.
Whammy™ is an effect that uses an Expression Pedal to bend the pitch of the incoming signal, or add a
bendable harmony with the original signal. As the Pedal is moved, the note bends either up or down.
When Whammy™ is selected, it is automatically placed before the Amp Modeling as shown in the block
diagram (see page 19).The Whammy™ effect must be linked to the Expression Pedal in order to function.
See page 62 for more information on linking the Expression Pedal.
Whammy™
Parameter 1 (Whammy™) - The Parameter 2 knob selects the interval and direction of the pitch
bend. Choices are as follows:
Whammy™ (no Dry Signal)
1 OCT UP (1 octave up)
2 OCT UP
(2 octaves up)
2NDDOWN
(a second down)
REV2NDDN (a second down reversed pedal
action)
4TH DOWN
(a fourth down)
1 OCT DN
(an octave down)
2 OCT DN (2 octaves down)
DIVEBOMB
(Dive Bomb)
Harmony Bends (Dry Signal Added)
M3>MAJ3 (a minor third to a Major third)
2ND>MAJ3
(a second above to a Major third up)
3RD>4TH
(a third above to a fourth up)
4TH>5TH
(a fourth above to a fifth up)
5TH>OCT
(a fifth above to an octave up)
H OCT UP
(one octave up)
H OCT DN
(one octave down)
octup>Dn (one octave up to one octave down)
20
Effects and Parameters