DigiTech GeNetX BNX3, Руководство пользователя

Страница: 40 / 82

Adjust the Noise Gate
For your example, you want our Noise Gate to open quickly with a relatively weak signal. This type of
gate uses the Silencer™ with a low threshold and short attack time. To create this type of Noise Gate,
do the following:
1. Press the
EFFECT SELECT DOWN button and the Noise Gate’s LED lights.
2. If the display reads off (
Of
), press the STATUS button until the display reads on (
On
).
3. Rotate the Parameter 1 knob until the display reads
SILeNCeR
for the type of gate.
4. Rotate the Parameter 2 knob to set the Threshold to
20
(this may need to be adjusted depending
upon your bass).
5. Rotate the Parameter 3 knob to set the Attack Time to
0
(fast attack).
Select and Adjust the Chorus
Next you wanted to thicken up the sound, by adding a subtle Chorus effect, in the following manner:
1. Press the
EFFECT SELECT DOWN button again and the LED in the Chorus/Mod row lights.
2. If the display reads off (
Of
), press the STATUS button until the display reads on (
On
).
3. Rotate the Parameter 1 knob until the display reads Chorus ( Chorus ) for the effect type.
4. Rotate the Parameter 2 knob to set the Chorus Speed to
5
.
5. Rotate the Parameter 3 knob to set the Chorus Depth to 30 .
6. Rotate the Parameter 4 knob to set the PreDelay to
10
.
7. Rotate the Parameter 5 knob to set the Chorus Level to 50 .
35
Tutorial