2. Press the
SETUP
button until the BNX3’s main display reads
Rock 1
(This is the factory default
pattern).
3. Use the
DATA WHEEL
to change the pattern.
4.When finished, press
EXIT
.
Tempo
Tempo designates how fast the Click Track plays during recording. It also sets the tempo for the BNX3’s
drum machine that can be recorded or synchronized to each song. To setup the Tempo, follow these
steps:
1. Begin with the recorder stopped.
2. Press the
SETUP
button until the BNX3’s main display reads
tmpo=120
.
3. Use the
DATA WHEEL
to adjust the tempo.
4.When finished, press
EXIT
.
NOTE: Although the Tempo of a song can be changed after tracks have been recorded, it is
not advised that you do so because previously recorded tracks will not be
synchronized with tracks recorded after the change. The Recorder Tempo also
controls the Drum Machine tempo when recording or playing a virtual Drum track.
Drum Level
The Drum Level sets the playback level of the selected drum pattern.
1. Begin with the recorder stopped.
2. Press the
SETUP
button until the BNX3’s main display reads
drum lvl
.
3. Use the
DATA WHEEL
to adjust the playback level.
4.When finished, press
EXIT
.
Pre-Roll
Pre-Roll is an amount of time you can have the recorder count off before actually beginning to record.
Use Click Track during Pre-Roll so that you can then get a feel for the tempo of the track or song you
are about to record. Pre-Roll can also be used as a cue, indicating when the very beginning of the song
starts. The BNX3’s Pre-Roll has 3 settings, 4, 8, or 16 counts. To setup the Pre-Roll function, follow these
steps:
1
00 00
tmpo=120
OF
42
Recorder
Содержание GeNetX BNX3
Страница 1: ...GENETX BASS WORKSTATION TM USER S GUIDE...
