Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.00: 10 Sept, 2021
Page
9 of 46
Input
Main Source
VGA
HDMI 1
HDMI 2
DisplayPort
HD/SDI
Auto Select : Enable / Disable the Auto source seek function
PIP Source
VGA
HDMI 1
HDMI 2
DisplayPort
HD/SDI
Auto Select : Enable / Disable the Auto source seek function
PIP
Mode
Off
PIP
PBP
PIP Size
Adjust the PIP size, total: 5 steps
Press – or + (- + ) 1~5 [Default : 1]
PIP H-Position
Move the PIP position to the left/right position, total: 100 steps
Press – or + (- + ) 0~100 [Default : 0]
PIP V-Position
Move the PIP position to the up/down position, total: 100 steps
Press – or + (- + ) 0~100 [Default : 0]
Audio
(Function when HDMI and Display Port connected and selected)
Volume
Increase/decrease volume level, total: 100 steps
Press – or + (- + ) 0~100 [Default : 50]
Mute
Off / On [Default: OFF]
Hotkey
Hotkey1
Volume / Black level / Contrast / Inputs / Aspect/Size / PIP Size / PIP ON/OFF /
Saturation / Hue / Brightness / Auto Adjust / Rotate / No Function
Hotkey2
Volume / Black level / Contrast / Inputs / Aspect/Size / PIP Size / PIP ON/OFF /
Saturation / Hue / Brightness / Auto Adjust / Rotate / No Function
Utilities
Language
OSD menu language selection :
English
French
Spanish
Auto Power
Off : Disable standby mode function
On : Enable standby mode if absence of input signals.
Default Power State
Off : When the controller detects power in, it will stay in 'Stand-by' mode.
On : When the controller detects power in, it will turn on the power and display
image. [Default]
OSD Transparency
Transparency : Set OSD transparency
Press – or + (- + ) 0~100 [Default : 0]
OSD Timeout
Timer : OSD Timeout in seconds
Press – or + (- + ) 5~60 [Default : 15]
Factory Reset
Reset : Load factory default settings.
Press down on OSD keypad to factory reset
Firmware Upgrade
Are you sure to upgrade ? No / Yes.
Information
Model : HX-2560-SDI
Firmware version
Main resolution
Pip resolution
# Function in VGA mode only
