Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.00: 10 Sept, 2021
Page
26 of 46
SPECIFICATIONS
Panel compatibility
Compatible with 2560x1600, 2560x1440, 1920x1920, 1920x1200, 1920x1080,
1920x480, 1680x1050, 1600x1200, 1600x900, 1440x900, 1366x768, 1280x1024,
1280x800, 1280x768 1024x768, 1024x600, 800x600, 800x480 and 640x480
resolutions of TFT LCD panels.
A specified BIOS and some factory adjustment may be required for individual
panel timings.
No. of colors
Up to 3 x 10 bit providing 1.06 billion colors.
Panel power
DC 3.3V, 5V, 10V, 12V, 18V
Panel signal
LVDS
Vertical refresh rate
60Hz at 2560x1600, 120Hz at 1920x1200, 1920x1080, 60Hz at 1920x1920, up to
UXGA 75Hz or other lower resolution
Display clock maximum
165MHz
ADC clock maximum
195 MHz
Graphics formats
Standard VESA VGA, SVGA, XGA, SXGA, WXGA, UXGA, WUXGA
Other special formats through specified BIOS and factory adjustment.
Graphics auto mode detect
VGA, SVGA, XGA, SXGA, WXGA, UXGA & WUXGA interlaced and non-interlaced
Standard input at source (analog
RGB)
VGA analog (15 pin) standard with automatic detection of:
Digital Separate Sync;
Sync On Green.
Video formats
PAL, NTSC & SECAM
Video inputs
VGA
HDMI 1
HDMI 2
DisplayPort
HD/SD-SDI
Functions display
On screen display (OSD) of functions
OSD menu functions
Image controls:
Panel brightness/contrast, Saturation, Hue, Color temperature, Sharpness, Aspect
ratio etc.
OSD menu controls available
Power On/Off
Backlight brightness
OSD Menu
OSD Select up
OSD Select down
S
Setting -
Control interface
Buttons, RS-232, IR Remote control
Settings memory
Settings are stored in non volatile memory
PC Connectivity
VGA / SVGA / XGA / SXGA / UXGA / WUXGA analog or digital
Controller dimensions
127mm x 101.6mm (5” x 4”)
Power consumption
5w approx. (not including panel power consumption)
Power load maximum
The controller has an overall 3Amp current limit.
Input voltage
12V/24VDC +/- 5%
Power protection
Fuse fitted (Non resettable type)
DC Power handling
Reverse power polarity protection is equipped on the board
Storage temperature limits
-40
o
C to +70
o
C
Operating temperature limits
0
o
C to +60
o
C
Use of memory on board
- 1 pc SD RAM 1Gbits which is a volatile memory for OSD and frame buffer.
- 1 pc flash 64Mbits which is a non-volatile memory for system program.
- 1 pc EEPROM 128KBits which is a non-volatile memory for system setting
storage.
- 1 pc EEPROM 8KBits which is a non-volatile memory for HDCP key.
- 3 pc EEPROM 2KBits which is a non-volatile memory for HDMI1, HDMI2, DVI
EDID.
NOTES
Please note the following:
•
For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full
technical specifications for the panel from the manufacturer.
•
Re-layout and custom development services are available.
