Using Console Commands
SET
Commands
Table 4–3 lists the function of each SET command.
Table 4–3 SET Commands
To set this feature:
Enter this command:
Set boot flags
SET BFLG
Define the boot device
SET BOOT
Set the recovery action
SET HALT
Select the keyboard language
SET KBD
Enable the password bit
SET PSE
Enable the password security feature
SET PSWE
Set the SCSI bus host ID number
SET SCSI
TEST
Commands
Table 4–4 list the tests you can run using each TEST command.
Table 4–4 TEST Commands
To run this test:
Enter this command:
Self-test on sound chip
TEST AUD
Self-test on cache
TEST CACHE
Self-test on serial line controller
TEST DZ
Self-test on floating point unit
TEST FPU
Self-test on interval timer
TEST IT
Self-test on graphics option
TEST LCSPX or SP3D
Self-test on system memory
TEST MEM
Self-test on network interface
TEST NI
Self-test on nonvolatile RAM
TEST NVR
Self-test on device controller
TEST SCSI
Self-test on interrupt controller
and Ethernet ID ROM
TEST SYS
System exerciser
TEST 100
4–8 Using Your System