Specifications, C–1
electrical, C–2
environmental, C–4
system, C–3
Standard Ethernet
connecting (fig.), 3–5
port function, 1–9
Start-up
error messages, 5–7
screen display (fig.), 3–2
successful test display, 5–9
system exerciser, 5–12
tests, 5–1
troubleshooting, 6–3
Start-up display
mnemonics, 5–4
Status bar
at start-up, 5–1
Sticker
for factory installed software (fig.), 2–9
System
address label, 2–16
features, 1–1
turning off, 6–2
turning on, 6–3
System exerciser
display example, 5–12
restarting after running, 5–15
successful test, 5–11
test with errors, 5–15
testing media, 5–9
System power cord
attaching (fig.), 2–10
System power port
function of, 1–8
System unit
diagnostic lights, 5–6
dimensions, C–2
environmental specifications, C–4
front view (fig.), 1–5
hardware specifications, C–1
rear view (fig.), 1–7
troubleshooting, 6–3
T
T-connector
assembling (fig.), 2–2
attaching (fig.), 2–3
removing (fig.), 3–9
Tape drives
boot device name, 5–15, A–3
TEST 100 command, 5–10
TEST command, 4–8
ThinWire Ethernet
connecting (fig.), 3–6
improper connection error, 5–6
port function, 1–9
removing, 3–9
Troubleshooting
lights (LEDs), 5–6
monitor, 6–3
self-tests, 5–7
start-up error messages, 5–7
system exerciser, 5–9
system unit, 6–3
Turning off the system
sequence for, 6–2
Turning on the system
sequence for, 6–3
U
Universal strain relief strap
attaching (fig.), 2–6
figure of, 1–3
V
Video in/Video out connectors
using, 2–7
VMS
See OpenVMS
Index–4