Digital Equipment VAXstation 3100, Руководство по установке обновления

Страница: 14 / 115

6 Upgrading a Diskless Model 30
NOTE
Before disconnecting the power cable in the next step, be sure
to release the connector latch on the back side of the power
connector.
2. Disconnect the power cable and the battery cable from the system
module.
M A - X 0 8 0 5 - 8 8
P O W E R
C A B L E
B A T T E R Y
C A B L E
P A N H E A D
S C R E W S
G R O U N D
T A B S
P A N H E A D
S C R E W S
L O C A T I N G
S T A N D O F F
L O C A T I N G
S T A N D O F F
( 3 )
( 5 )
3. Remove the eight screws from the system module.
4. Remove the system module by carefully popping off the two front
corners of the two locating standoffs.
CAUTION
In the next step, you will swap the Ethernet ID ROMs on both
the new system module and the old system module that you
just removed. Be careful not to bend the pins on the ROM or
not to mix up the ROM that goes on each system module.