manualshive.com logo in svg

Digital Equipment StorageWorks RAID Array 410, Руководство по установке

Поделиться
Скачать
Digital Equipment StorageWorks RAID Array 410 Скачать руководство пользователя страница 117

Chapter 5.  Windows NT

EK–SM410–UP. A01

5–19

READ_CACHE

HSZ> set [

LUN] read_cache

HSZ> set [

LUN] noread_cache

MAXIMUM_CACHED_TRANSFER_SIZE

HSZ> set [

LUN] maximum_cached_transfer_size=[number]

where [

number

] is a number from 1 through 1024.

5.9.7  Verify Configuration

Before the host system is powered-on it is advisable to recheck the RAID Array 450
configuration with the pre-upgrade RAID Array 410 configuration.  In this process
compare the new settings with the original settings recorded on the blank forms provided
in this document.  Specifically check:

• 

Host Port SCSI Target(s), Host Port Preferred Target(s), Cache Policy and

HOST_FUNCTIONALITY

 settings recorded on the Controller Table.

• 

SHOW UNITS

 displays all of the logical units and storagesets previously recorded

on the Logical Units Table

• 

SHOW STORAGESETS

 lists all of the containers recorded on the Storagesets

Table:

• 

Check logical unit Used by each of the storagesets

• 

Check Name and Type of each storageset

• 

Check devices in use by (Uses) each storageset

• 

Show storageset_ name list proper storageset attributes

5.10   Power-on Host System

Now that the RAID Array 450 configuration has been verified, the host system may be
powered-on. Since the configuration has been modified, the system may require
additional time to complete its initialization. Once the system has completed the
bootstrap process, login as “administrator” and invoke “disk administrator” to verify
that the RAID volumes are visible by the host:

5.11

Install StorageWorks Agent

Refer to Chapter 5 of Getting Started RAID Array 450 for Windows NT-Intel/PCI or
Getting Started RAID Array 450 for Windows NT-Alpha.

5.12

Install StorageWorks Command Console

Refer to Chapter 3 of Getting Started RAID Array 450 for Windows NT-Intel/PCI or
Getting Started RAID Array 450 for Windows NT-Alpha.

5.13

Congratulations

This completes the RAID Array 450 Upgrade Procedure. The system is now  ready to be
placed on-line.

Содержание StorageWorks RAID Array 410








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды