manualshive.com logo in svg

Digital Equipment StorageWorks RAID Array 410, Руководство по установке

Поделиться
Скачать
Digital Equipment StorageWorks RAID Array 410 Скачать руководство пользователя страница 100

RAID Array 410 to 450 Upgrade

5–2

EK–SM410–UP. A01

5.1.1  Upgrade Prerequisites

Before upgrading the RAID Array 410 controller(s) and cache module(s), please review
the following:

• 

The RAID Array 450 is supported on WNT 3.51 and WNT 4.0. If you are running
WNT 3.51, upgrade your HSZ controller driver (HSZDISK.SYS) to Version 2.51 or
later. If you are running WNT 4.0, upgrade your HSZ controller driver
(HSZDISK.SYS) to Version 3.01 or later. You may obtain the latest driver at our
web site - 

www.storage.digital.com

.

• 

Included with the RAID Array 450 Version 5.0 software is the StorageWorks
Command Console (SWCC), a graphical user interface capable of configuring and
monitoring your RAID 450 subsystem.

• 

One platform kit is required for each controller. In addition to other components, the
platform kit includes the HSOF Version 5.0 Program Card required for controller
operation.

• 

This procedure documents existing RAID Array 410 single controller to single
controller upgrades and dual-redundant to dual-redundant controller upgrades only.
To upgrade a single controller to a dual-controller configuration, first perform the
single to single upgrade and then add the second controller using the procedure
described in Chapter 1 of the Getting Started RAID Array 450 for Windows NT-
Intel/PCI or Getting Started RAID Array 450 for Windows NT-Alpha.

• 

The controller(s) and all storagesets must be in normal running conditions.

• 

During this upgrade procedure do not add, remove, or move any devices. Any device
configuration changes can be made after the upgrade is completed and verified.

• 

After removing the old controller, return the controller and PC card in accordance
with the instructions contained in the customer letter found in the RAID Array 450
upgrade kit.

5.1.2

Tools Required

You need the following tools to remove or replace the controller module:

• 

ESD (ElectroStatic Discharge) strap

• 

Medium blade screwdriver for module replacement

• 

Small blade screwdriver for trilink and external cache battery cable fasteners

Содержание StorageWorks RAID Array 410








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды