manualshive.com logo in svg

Digital Equipment LSR 2000, Руководство по обслуживанию, Страница: 17 / 427

Поделиться
Скачать
Digital Equipment LSR 2000 Скачать руководство пользователя страница 17

 

Preface

Colorwriter LSR 2000 Printer
Service Guide

 

xvii

 

 

•

Be sure to turn off the power before unplugging or plugging in 
the printer power cord or interface cable.

•

Be sure to use a surge suppressor on the Colorwriter.

 

Operating the Colorwriter

 

•

Slots and openings in the cabinet are provided for ventilation. 
To ensure reliable operation of the printer and protect it from 
overheating, these openings should never be blocked or covered.

•

The printer is equipped with a 3-wire grounding type plug, 
which has a third (grounding) pin. This plug will fit only into a 
grounding-type power outlet. If you are unable to insert the 
plug into the outlet, contact your electrician to replace your 
obsolete outlet. Do not defeat the purpose of the grounding-
type plug.

•

If the printer will not be used for a long period of time, turn the 
power off and unplug the power cord.

•

Unplug the printer from the wall outlet before cleaning. Use a 
damp cloth for cleaning. Do not spray liquid cleaners or aerosol 
cleaners directly on the cabinet or the openings, as the spray 
could penetrate inside the printer and contaminate internal 
parts.

•

Never push objects of any kind into the printer through 
openings in the enclosure, as the objects may touch dangerous 
voltage points or short out parts. This could cause a fire or 
electrical shock.

•

Never spill any liquids into the printer.

•

The outlet should always be free from any obstacles so as to 
allow easy access.

•

When unplugging the printer, always disconnect the power cord 
by pulling on the plug, not the cord itself.

Air ventilation slots

Inhalation slot

Содержание LSR 2000












































































































































































































































































































































































































































Отзывы:

Нет отзывов