Digital Equipment EtherWORKS Turbo PCI, Информация пользователя

Страница: 35 / 48

Table A–1 (Cont.) Fault Isolation By Symptom
Symptom Possible Cause Recommended Action
The PCI slot containing
the board is not enabled.
Use the BIOS Setup
utility to enable the PCI
slot.
The system
is on and
displays a DE435
configuration error
during system
startup. A possible problem exists
with the board. See Table A–2. Press
the
F1 key to continue.
Reinsert or replace the
board and try starting
the system again.
The error code could be a
system error code. See your computer
owner’s manual for
additional information.
If the problem persists,
contact your system
administrator.
Diagnostic Test Errors
Table A–2 describes the EtherWORKS Turbo PCI board diagnostic
test error messages and the recommended corrective actions for each
group of messages.
Note
If the board detects an error and is not operating, you can still
use your computer.
A–3