Digital Equipment EtherWORKS Turbo PCI, Информация пользователя

Страница: 33 / 48

A
Problem Solving
This appendix describes problems you could encounter when installing
the EtherWORKS Turbo PCI board and suggests possible causes and
solutions. The EtherWORKS Turbo PCI board is also referred to as
board in this appendix.
Fault Isolation By Symptom
Table A–1 describes how to isolate faults by the symptoms that are
occurring.
Table A–1 Fault Isolation By Symptom
Symptom Possible Cause Recommended Action
The system is on,
but there is no
display. The monitor is not on or
it is not connected to the
video board. Be sure the monitor
cable is firmly connected
to the video board. Set
the monitor power
switch to ON.
The board is not seated
firmly. Turn your system off,
reseat the board, then
turn the system on
again (see Chapter 2).
(continued on next page)
A–1