Digital Equipment EtherWORKS Turbo PCI, Информация пользователя

Страница: 26 / 48

Connecting to an AUI Ethernet Network
To connect the EtherWORKS Turbo PCI board to an AUI network:
1. Slide the latch assembly, located on the board’s AUI connector,
upward.
2. Plug the AUI cable connector into the 15-pin AUI connector,
located on the board’s mounting bracket.
3. Slide the latch assembly downward to lock the connector in place
(see
#
in Figure 2–4).
Note
Do not connect more than one Ethernet cable to the
EtherWORKS Turbo PCI board at the same time (see
$
in Figure 2–4).
2–12