EVO Control Panel
1
1
Introduction
The Digiplex EVO is a security and access control system with 8 on-board
zone inputs (16 with zone doubling) that is expandable to 48 or 192 zones
via the 4-wire combus. The EVO control panel features up to 999 users, 8
partitions, 32 doors and can support up to 254 modules in any combination.
The Digiplex EVO system provides the highest level of protection for banks,
high-security military and government sites, luxurious residential homes
and any place where maximum security is essential. These systems are
designed to be easy to use, and the modular concept of these systems
provides installers with labour-saving features that make expanding,
installing and servicing these systems quick and convenient.
Expand the EVO system by adding plug-and-play expansion modules
anywhere and in any combination on the 4-wire combus. Modules are
connected to the combus at the most convenient location and then their
zone inputs are assigned to the desired zone and partition. Also, only a
module’s used inputs are assigned to zones in the system. Keyswitches,
remote controls and unused module inputs do not use up zones. Once
installed, all combus modules, including motion detectors, can be
programmed remotely via a keypad or the WinLoad upload/download
software.
EVO also supports 32 virtual zones in addition to its security zones and
access control doors. Virtual zones can be used to automate PGM
activations without occupying a security zone and without affecting the
system’s security functions. The EVO system is a logical solution to every
installer’s security, access control and home automation installation needs.
1.1 Features of EVO48
Digital combus:
• Provides constant power, supervision and two-way communication
between the control panel and all its modules
• Supports up to 127 modules
• Connect modules up to 914m (3000ft) from the panel
• Sabotage-proof technology without additional wiring
8 on-board zones (16 w/ zone doubling) expandable to 48 zones via
4-wire combus
Built-in access control features
In-field firmware upgradeable via 307USB and WinLoad
Compatible with NEware
Automatic Daylight Saving Time feature
2 on-board solid-state relays PGM outputs (+ 3 optional), negative or
positive triggering
PGM1 can be used as a 2-wire smoke input
96 user codes
4 partitions
1024 events buffered
Program remote controls using the master or installer codes
Up to 96 remote controls with one MG-RTX3
Built-in-real-time clock backup battery
1.7A switching power supply
1 supervised bell output, auxiliary output and telephone line
Push button software reset (reset to default values and restart)
Push button to activate or deactivate the Auxiliary output
Fits in a 28cm x 28cm x 7.6cm (11in x 11in x 3in) metal box
The EVO series share the same programming for easy panel substitution
1.2 Features of EVO192
Same features as the EVO48 plus:
Expandable to 192 zones
5 on-board solid-state PGM outputs, negative or positive triggering
Supports up to 254 expansion bus modules
999 user codes
8 partitions
2048 events buffered
Up to 999 remote controls with one MG-RTX3
1.3 Hardware Difference
The programing for the EVO48 and EVO192 panels is identical. However,
certain differences may affect how many elements can be programmed.
1.4 Specifications
Control Panel (Non-UL systems)
AC Power:
16Vac, 20/40VA, 50-60Hz
Battery:
12Vdc, 7Ah minimum
Auxiliary Power:
12Vdc 600mA typical, 700mA maximum,
fuseless shutdown at 1.1A
Bell Output:
1A, fuseless shutdown @ 3A
PGM Output:
PGM1 to PGM4 100mA solid-state relays with
+/- trigger, PGM5 Form C relay output rated at
5A/28Vdc N.O. / N.C.
Operational Temperature: -20°C to +50°C (4°F to +122°F)
All control panel outputs are rated to operate between 10.8Vdc and
12.1Vdc
Control Panel (UL compliant systems)
AC Power:
16Vac, 40VA, 60Hz
Battery:
12Vdc, 7Ah minimum
Auxiliary Power:
11.4 to 12.5Vdc, 200mA maximum, fuseless
shutdown at 1.1A
Bell Output:
11.4 to 12.5Vdc, 1A maximum, fuseless
shutdown @ 3A
PGM Output:
PGM1 to PGM4 100mA solid-state relays with
+/- trigger, PGM5 Form C relay output rated at
5A/28Vdc N.O. / N.C.
All control panel outputs are rated to operate between 11.4Vdc and
12.5Vdc
Specifications may change without prior notice.
Feature
EVO48
EVO192
Zones
48
192
Partitions
4
8
Users
96
999
On-board PGMs*
2
5
Modules
127
254
General Note 1
Please note that only LCD and Grafica keypads can be used to program the
EVO system. LED keypads cannot be used to program the system.
General Note 2
Please note that the steps may differ when programming with the Grafica
keypad (DNE-K07). If not indicated, refer to the complete “Grafica User
Manual”, which can be downloaded for free from our website at
paradox.com
