Page 50
- “effr to gol” - The efficiency required to arrive at goal.
- “Tot dst km” - Total distance of the Route.
Confirm on the Competition Route page (Rt 1 Comp) that all information has been
correctly entered and then press the
key to activate the Route. Now you are ready to
navigate.
6.19.2
START PYLON NAVIGATION
If the current Waypoint is a Start Pylon, the message
“START PILON” appears on the glide pages. 5 minutes
before the Start Pylon Absolute Time Gate, the instrument
will automatically switch the time display (the fifth in the
Thermal Display page and the third in the Glide Compass
and Glide Plotter Display screen) to the “Remaining count
down timer to Start Pylon Time Gate” (Timer Start “es”)
display.
Additionally. if the current waypoint is a Start Pylon, the
Glide Plotter Display automatically switches first three
instrument displays to “dst1”, er0” and “es” and also
disables the HSI cross hair.
When the “Remaining count down Timer to start pylon time gate” (Timer Start “es”)
reach “0” it starts to flash and a popup message “Gate Opened” with long beep alerts to
inform the pilot that the time gate has opened.
At this point, if the parameter “SGnm” is bigger than “0”, is possible to switch to the next
start time gate with a long press of the
key.
When the time gate has opened, you are allowed to cross the start Pylon circle (in or out
depending on the start pylon icon selected). When you across the circle on the correct
side a popup message “Start is OK” appears, the Chrono “ch” is automatically zeroed
and the Route navigation automatically jumps to the next Waypoint.
If you across the Start Pylon circle earlier than the Start time gate has opened, the
distance indicator in the circle “dis1” is reversed, to alert you that you are on the wrong
