Digifly cartesio 2 Скачать руководство пользователя страница 40

Страница: 40 / 71

Page 40

- HSI BRG1

- HSI (H1)

6.8

GROUND SPEED GPS

Ground Speed is the speed over the ground (“Gs” icon).

6.9

GPS DIRECTION (TRK)

GPS Direction (“TRK”) is the direction of movement relative to the ground.

6.10

WIND SPEED AND DIRECTION INDICATION USING GPS

The wind speed and direction are automatically calculated, displayed and stored at

different altitude ranges using GPS.

During flight the Digifly Leonardo recognizes if you are flying rectilinear or turning using

the GPS Direction (“TRK”) and the GPS ground speed (“Gs”) values.

6.10.1

TURNING

For the Digifly Leonardo to determine the wind speed and direction, you should

make a “normal” turn, that is neither too tight, nor too wide.

It is also important to maintain constant airspeed during the turn.

For an accurate calculation, a 360º turn must be completed.

6.10.2

RECTILINEAR FLIGHT

On the Glide Compass display screen and the Glide Plotter display screen, the flag

icon shows you the wind direction.

GLIDE COMPASS DISPLAY

GLIDE PLOTTER DISPLAY

Содержание cartesio 2








































































Результаты поиска

Содержание cartesio 2

Отзывы:

Похожие инструкции для cartesio 2

Бренды по названию

Популярные бренды

Digifly cartesio 2, Руководство пользователя

Результаты поиска

Содержание cartesio 2

Отзывы:

Похожие инструкции для cartesio 2

Бренды по названию

Популярные бренды