DigiDesign Control 24, Руководство пользователя

Страница: 97 / 159

Chapter 11: Recording 87
Chapter 11: Recording
This chapter explains all the steps required to
record into Pro Tools using Control|24. Instruc-
tions include configuring session parameters,
assigning input and output routing, record-en-
abling tracks, and initiating recording from the
transport.
Starting the Recording
Process
Before you start your first recording pass with
Control|24, make sure you have configured the
sample rate and other Session Setup parameters.
Press STATUS (in the WINDOWS section) to dis-
play the Session Setup window on-screen. Refer
to the
Pro Tools Reference Guide for details about
these parameters.
Make sure you have also followed all the other
instructions for recording in the
Pro Tools Refer-
ence Guide (Disk Allocation, MIDI Metro-
nome/Click, Countoff, and other preparation
procedures).
Assigning Channel Input
In order to select a source for channel input, you
must be in the default “home” mode or Sends
mode. Input and output assignments cannot be
made while Pro Tools is playing or recording.
To assign an audio channel input from “home” or
Sends mode:
1
Press ASSIGN. The ASSIGN and ESC/CANCEL
switches will both flash.
2
Press INPUT. The INPUT switch LED will light.
The scribble strip for each track will display ex-
isting input assignments.
3
Adjust the channel data encoder knob to
scroll through the list of inputs.
4
When the abbreviated name of the input you
want appears in the scribble strip, press the
flashing switch directly below the data encoder
knob to confirm your decision.
5
Adjust the data encoder knobs until the input
you want on any other tracks is displayed.
6
Press the flashing switches directly below the
data encoder knobs to confirm any other
choices.
7
Press ASSIGN or ESC/CANCEL to leave Input
Assignment mode. The ASSIGN and ESC/CAN-
CEL switches will stop flashing to indicate that
you have left the Assignment mode.
Your input selections will not be saved if
you press ESC/CANCEL without first con-
firming your selections by pressing either the
master ASSIGN switch or the flashing
switch directly below the data encoder knob
on each selected track.