DigiDesign Control 24 страница 79 Скачать руководство пользователя

Страница: 79 / 159

Chapter 9: Working with Tracks

Shortcuts employing the MASTER REC switch:

• Press MASTER REC to record-enable all audio

tracks.

• While pressing APPLY TO ALL SELECTED

CHANNELS or SHIFT/ADD, press
MASTER REC to enable all currently selected
audio tracks.

• While pressing OPT(ALT)/ALL, press

MASTER REC to enable all MIDI tracks.

• While pressing OPT(ALT)/ALL+SHIFT/ADD,

press MASTER REC to enable all currently se-
lected MIDI tracks.

By default, pressing MASTER REC once will take
all channels out of record-ready if any tracks are
armed. Pressing MASTER REC a second time will
place all channels into record-ready mode.

When at least one track is record-enabled, press-
ing MASTER REC disables record for all tracks.

For more information about Recording func-
tions, see Chapter 11, “Recording.”

DEFAULT QuickMode Switch

This switch reverts a control to its default set-
ting, and is equivalent to pressing
OPT(ALT)/ALL and clicking an on-screen con-
trol in Pro Tools.

To reset a fader to its default setting:

■

Press any channel SELECT switch.

To reset all faders or encoders to their default
setting:

■

While pressing APPLY TO ALL

CHANNELS, press any channel’s SELECT switch.

To reset all selected faders or encoders to their
default setting:

■

While pressing APPLY TO ALL SE-

LECTED CHANNELS, press any channel’s SE-
LECT switch.

To remove a selected plug-in:

■

In Insert Assign mode, while pressing DE-

FAULT, press the encoder switch beneath a plug-
in’s name to remove it.

COPY SETTINGS FROM
CHANNEL and PASTE SETTING
TO CHANNEL

Settings can be copied from one instance of a
plug-in and pasted into another with dedicated
command switches from Control|24.

To copy the settings from the current Target plug-
in:

■

Press COPY SETTINGS FROM CHANNEL.

Содержание Control 24
































































































































































Результаты поиска

Содержание Control 24

Отзывы:

Похожие инструкции для Control 24

Бренды по названию

Популярные бренды

DigiDesign Control 24, Руководство пользователя

Результаты поиска

Содержание Control 24

Отзывы:

Похожие инструкции для Control 24

Бренды по названию

Популярные бренды