DigiDesign Control 24 Скачать руководство пользователя страница 106

Страница: 106 / 159

Control|24 Guide

TrackPunch Enabling Tracks

While in TrackPunch mode,

ou can Track-

Punch enable tracks without record enabling
them, which lets you punch in individual tracks
after you start playback.

To TrackPunch enable or disable an audio track:

■

Hold the CTL/CLUTCH switch and press the

track’s REC ARM switch to toggle the track’s on-
screen Record Enable button to solid blue.

To TrackPunch enable or disable all audio tracks:

■

Hold the CTL/ OPT (ALT) ALL

switches and press any track’s REC ARM switch
to toggle the on-screen Record Enable buttons
to solid blue.

To TrackPunch enable all selected audio tracks:

■

Hold the SHIFT/ADD + CTL/ OPT

(ALT) ALL switches and press a selected track’s
REC ARM switch twice to toggle the on-screen
Record Enable buttons to solid blue.

TrackPunch and Record Enabling Tracks

You can simultaneously TrackPunch enable
tracks and record enable them, which starts re-
cording as soon as playback begins.

To simultaneously TrackPunch enable and record
enable an audio track:

■

Press the track’s REC ARM switch to toggle the

track’s on-screen Record Enable button to flash-
ing blue and red.

To simultaneously TrackPunch enable and record
enable all audio tracks:

■

Hold the OPT (ALT) ALL switch and press any

track’s REC ARM switch to toggle the on-screen
Record Enable buttons to flashing blue and red.

To simultaneously TrackPunch enable and record
enable all selected audio tracks:

■

Hold the SHIFT/ADD + OPT (ALT) ALL

switches and press a selected track’s REC ARM
switch to toggle the on-screen Record Enable
buttons to flashing blue and red.

Track Record Status Display

Each track’s on-screen Record Enable button in-
dicates its TrackPunch and record enable status
as follows:

• When a track is both TrackPunch-enabled and

record-enabled, its on-screen Record enable
button flashes blue and red.

• When a track is TrackPunch-enabled but not

record-enabled, its on-screen Record Enable
button lights solid blue.

• When a track is record-enabled only, its on-

screen Record Enable button flashes red.

• While a track is recording (in any mode), its

on-screen Record Enable button lights solid
red.

TrackPunch status indication in an audio track in the
Mix window

Track Record status in the Edit window

Record Enable button

Red (not flashing) indicates recording
(all modes)

Содержание Control 24
































































































































































Результаты поиска

Содержание Control 24

Отзывы:

DigiDesign Control 24, Руководство пользователя, Страница: 106 / 159

Результаты поиска

Содержание Control 24

Отзывы: