DigiDesign Control 24 страница 107 Скачать руководство пользователя

Страница: 107 / 159

Chapter 11: Recording

TrackPunch Recording

After you have put Pro Tools in TrackPunch
mode and enabled tracks for TrackPunch record-
ing, you can record with TrackPunch in several
ways.

Punching In On Single Tracks

To punch in on single tracks:

Put Pro Tools in TrackPunch mode.

Press the REC ARM switch twice on each track

you want to punch in, so that the track is Track-
Punch-enabled only. The track’s on-screen
Record Enable button lights solid blue.

Press the RECORD and PLAY switches on the

Control|24 transport to start playback.

During playback, punch in and out on indi-

vidual TrackPunch-enabled tracks by pressing
their REC ARM switches.

Stop playback. When you are finished with

the record pass, track Record Enable status and
transport Record Arm status follow the current
TrackPunch preference settings.

Punching In on Multiple Tracks

To punch in on multiple tracks simultaneously:

Put Pro Tools in TrackPunch mode.

Press the REC ARM switch on each track you

want to punch in, so that the track is both Track-
Punch- and Record-enabled. The track’s on-
screen Record Enable button should flash blue
and red.

Press the PLAY switch on the Control|24 trans-

port to start playback.

During playback, press the RECORD switch on

the Control|24 transport to punch in and out on
all TrackPunch-enabled tracks simultaneously.

Stop playback. When you are finished with

the record pass, track Record Enable status and
transport Record Arm status follow the current
TrackPunch preference settings.

Start Recording on All Tracks

To start recording on all tracks:

Put Pro Tools in TrackPunch mode.

Press the REC ARM switch on each track you

want to punch in, so that the track is both Track-
Punch- and Record-enabled. The track’s on-
screen Record Enable button should flash blue
and red.

Press the RECORD and PLAY switches on the

Control|24 transport to start recording on all
record-enabled tracks.

During playback, punch out and back in on

individual TrackPunch-enabled tracks by press-
ing their REC ARM switches.

Stop playback. When you are finished with

the record pass, track Record Enable status and
transport Record Arm status follow the current
TrackPunch preference settings.

Содержание Control 24
































































































































































Результаты поиска

Содержание Control 24

Отзывы:

Похожие инструкции для Control 24

Бренды по названию

Популярные бренды

DigiDesign Control 24, Руководство пользователя

Результаты поиска

Содержание Control 24

Отзывы:

Похожие инструкции для Control 24

Бренды по названию

Популярные бренды