manualshive.com logo in svg

DigiDesign Control 24, Руководство пользователя, Страница: 73 / 159

Поделиться
Скачать
DigiDesign Control 24 Скачать руководство пользователя страница 73

Chapter 9: Working with Tracks

63

Shortcuts

◆

APPLY TO ALL CMUTE or SOLO: 

clears or enables Mutes or Solos on 

all

 channels.

◆

APPLY TO ALL SELECTED CMUTE 

or SOLO: clears/enables Mutes or Solos on all se-
lected channels.

If there is at least one channel strip being soloed, 
pressing APPLY TO ALL CHANNELS and any 
SOLO switch will clear all solos, regardless of the 
solo state of the pressed channel strip. 

If there are no channel strips being soloed, 
pressing APPLY TO ALL CHANNELS and any 
SOLO switch will solo all the channel strips.

Using the SOLO CLEAR Switch

The SOLO CLEAR switch, directly to the left of 
the row of channel solo switches, flashes when-
ever any channel strip in the current session 
(even those located off-bank) is in solo mode. 

To clear all soloed channels (master un-solo):

■

Press SOLO CLEAR. The SOLO CLEAR switch 

LED will stop flashing. 

Pro Tools Solo and Mute Preferences 

There are several Pro Tools solo and mute pref-
erences that Control|24 fully supports, as fol-
lows:

Solo Safe 

locks out Solo Safe channels from im-

plied mute state when other channels are so-
loed.

Latch Solo Buttons 

toggles Solo latching mode.

Solo/Mute Follow Mix Groups 

determines 

whether soloing or muting individual members 
of a mix group changes the status of the entire 
group, or only of the individual member. 

Solo and Record Safe Modes

Channel strips can be placed into Solo and 
Record 

Safe

 modes. When in these safe modes, 

channels are locked out from implied mute or 
record states, respectively. 

If you attempt to record-arm a channel that has 
been placed in Record Safe mode, the REC ARM 
switch LED will not light. 

When a channel is in Solo Safe mode, it does not 
become muted as a result of another channel be-
ing soloed. Solo Safe channels, though pro-
tected from implied muting, can be 

explicitly

 

muted at any time, using the MUTE switches.

To enable Solo Safe status on a channel strip:

1  

Press SOLO SAFE. Its LED will flash.

2  

Press SOLO on any channels you would like to 

place in Solo Safe mode.

3  

Press SOLO SAFE again. Its LED will light solid, 

indicating that one or more tracks are in Solo 
Safe mode.

4  

Repeat the process to disengage any tracks 

from Solo Safe mode.

Содержание Control 24
































































































































































Отзывы:

Нет отзывов