digicon dTower, Руководство по эксплуатации продукта

Страница: 27 / 48

27
Confirming passage by disk emulation:
In this operation mode, any of the passage confirmation outputs – output Rl1 or Rl2 – can
be used to activate an electromechanical counter in order to count the passage flow in
both directions of the equipment.
Confirmação de passagem por pulsos
In this operation mode, the output Rl1 can be used to activate an electromechanical
counter in order to count the passage flow in the direction of entry of the equipment.
Similarly, the output Rl2 can be used to count the passage flow in the direction of exit.
Confirmation of passage by pulse or “ disk emulation ” can be configured through the
dipswitch Ds2 n.7; if it is at the ON position, disk emulation will be enabled; if it is at the
OFF position, a confirmation pulse will be generated for the passage.
1
1
Rl1
Rl2
1
1
Rl1
Rl2
Tower
1 Rl1
Rl2
1
Rl1
Rl2
Confirmation of exit
Confirmation of exit
Confirmation of entry
Confirmation of entry