digicon dTower, Руководство по эксплуатации продукта

Страница: 18 / 48

18
Tower
6.4 Fixation of doors
dTower is packaged with the doors unassembled, that is, they accompany the
equipment separately in order to avoid damage.
To install/fixate the doors, follow the step-by-step below:
1º Place the screw (1) only in the upper part, in the fastener hole (2);
2º With the screw inside the fastener hole (2), place it in the door hole (4);
3º With the three parts fitted, fix them to the equipment engine (5);
4º With the upper part fixed, place the screw (3) on the lower part, going through the
fastener (2), the door (6) and the engine (7);
5º With the door suspended, before tightening the screws all the way, align the door;
6º With a torque meter, the recommended torque is 20Nm when tightening the screws
in place.
Door(4)
Screw(6)
Fastener(2)
Screw(3)
Screw(1)
Engine (5)
Engine (7)