background image

41

All new Digga products are warranted to be free from defects in materials or workmanship, for a period of twelve (12) 

months from date of original purchase, which may cause failure under normal usage and service when used for the 

purpose intended.

In the event of failure within twelve (12) months from initial retail sale, lease or rental date (excluding cable, ground 

engaging parts such as sprockets, digging chain, bearings, teeth, tamping and demolition heads, blade cutting edges, 

pilot bits, auger teeth, auger heads ), if after examination, Digga determines failure was due to defective material and/

or workmanship, parts only will be repaired or replaced. Digga may request defective part or parts be returned prepaid 

to them for inspection at their place of business or to a location specified by Digga. 

The warranty will be considered 

void if the product or any part of the product is modified or repaired in any way not expressly authorized by Digga, or 

if closed components are disassembled prior to return. Closed components include, but are not limited to: gearboxes, 

hydraulic pumps, motors, cylinders and actuators. Any goods returned to Digga by the customer under warranty or 

repair must have all freight charges prepaid for on the customers account.

Any claims under this warranty must be made within fifteen (15) days after the Buyer learns of the facts upon which 

such claim is based. All claims not made in writing and received by Digga outside the time period specified above 

shall be deemed waived.

THIS  WARRANTY  IS  IN  LIEU  OF  ALL  OTHER  WARRANTIES  EXPRESSED  OR  IMPLIED  AND  THERE 

ARE  NO  WARRANTIES  OF  MERCHANTABILITY  OR  OF  FITNESS  FOR  A  PARTICULAR  PURPOSE. 

IN  NO  EVENT  SHALL  DIGGA  BE  LIABLE  FOR  CONSEQUENTIAL  OR  SPECIAL  DAMAGE.

DIGGA’S  LIABILITY  FOR  ANY  AND  ALL  LOSSES  AND  DAMAGES  TO  BUYER,  RESULTING  FROM  ANY 

CAUSE  WHATSOEVER,  INCLUDING  DIGGA’S  NEGLIGENCE,  IRRESPECTIVE  OF  WHETHER  SUCH 

DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF 

THE PARTICULAR PRODUCTS WITH RESPECT TO WHICH LOSSES OR DAMAGES ARE CLAIMED, OR, AT 

THE ELECTION OF DIGGA, THE REPAIR OR REPLACEMENT OF DEFECTIVE OR DAMAGED PRODUCTS.

WARRANTY

Motor - Limited warranty up to 12 months subject to manufacturers inspection

Gearbox - Limited warranty up to 12 months subject to manufacturers inspection

DAMAGE OR FAILURE THROUGH OPERATOR ABUSE OR NEGLIGENCE VOIDS WARRANTY

Содержание PD 30 HP-7













































Отзывы: