Digga PD 30 HP-7, Руководство оператора

Страница: 16 / 44

16
PM-000145 - PD/SD HIGH POWERED PLANETARY DRIVE MANUAL - MARCH 2019
The key feature of your Digga Auger Drive is low maintenance. It contains no user serviceable parts, unauthorised disassembly will
void warranty. WRITTEN PERMISSION FROM DIGGA MUST BE OBTAINED before performing any disassembly.
• Make sure that all nuts and bolts are in place and properly tightened.
• Make sure that all other fasteners are in place and are performing their specified function.
• Make sure that all hydraulic fittings are tightened and that there are no leaks in any fittings or hoses.
• Make sure that all safety signs are in place, are clean, and are legible. (SEE THE SAFETY SIGN SECTION)
• Check for any oil leaks.
• Wear and tear on pins, linkages, clips, bushes and hood.
• Ensure any damage or excessively worn parts are replaced.
• Always wear safety goggles or glasses when inspecting equipment.
SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS
BEFORE BEGINNING ANY DRIVE UNIT MAINTENANCE.
BEFORE FIRST USE
BEFORE EACH USE
● Inspect the attachment for shipping damage. If damage does exist, do not operate until the damaged parts have
been replaced or repaired.
7 BEFORE USE
Escaping fluid under pressure can have
sufficient force to penetrate the skin
causing serious personal injury. Fluid
escaping from a very small hole can
be almost invisible. Use a piece of
cardboard or wood, rather than hands
to search for suspected leaks. Keep
unprotected body parts, such as
face, eyes, and arms as far away as
possible from a suspected leak. Flesh
injected with hydraulic fluid may develop
gangrene or other permanent disabilities.
If injured by injected fluid, see a doctor at
once. If your doctor is not familiar with this
type of injury, ask him to research it
immediately to determine proper treatment.
WARNING!
CARDBOARD
HYDRAULIC HOSE
OR FITTING
MAGNIFYING GLASS