Digga PD 30 HP-7, Руководство оператора

Страница: 26 / 44

26
PM-000145 - PD/SD HIGH POWERED PLANETARY DRIVE MANUAL - MARCH 2019
9 INSTALLATION AND OPERATING INSTRUCTIONS - EXTENSIONS
1. Once you have obtained the maximum depth with the extension & auger you have, raise the auger out of the hole & clear the spoil
from the auger. Place the auger back into the hole ensuring the auger is bottomed out in the hole & the hub of the extension is clear
& easily accessible, remove the auger pin to disengage the auger drive from the auger. Install the additional extension onto the
auger drive with pin & safety clip, lower the extension & attach to the auger with second pin & safety clip. Always ensure persons
assisting are clear & visible to the operator at all times.
2. Recommence drilling. Once you have reached the maximum depth, raise the auger and extension out of the hole until the eyelets
of the extension are visible & just above the hole. Slide the two support bars through the two heavy duty eyelets or U brackets
welded to the outer extension. Either then remove the pin & section of extension and place away from the hole. Then re-pin back to
the bottom section, take the weight of the rest of the extension & auger on the machine & remove the support bars. Clear the auger
& then keep repeating these steps.
3. For telescopic extensions, use the same method as above, but slide the inner extension back into the auger & pin.
DIGGA DOES NOT ACCEPT ANY LIABILITY FOR INJURY OR DAMAGE RESULTING FROM THE OPERATOR USING THE
EXTENSION(S) OUTSIDE THE DESIGNED OPERATING PROCEDURE
EXTENSIONS & TELESCOPIC AUGER EXTENSIONS - OPERATING PROCEDURE