6
3. INSERTING BATTERIES INTO THE REMOTE
Open the cover of the battery compartment,
using the designated lever.
Insert the batteries (4 AA, 1.5V) as shown in
the figure. Ensure correct direction of polarity
(+/–).
Close the cover of the battery compartment
using the designated lever.
NOTE: Use high quality alkaline batteries
only.
4. SET-UP LANGUAGE SELECTION, CURRENT DATE AND TIME
When the display is turned off, press one of the programming buttons to start the display.
Turn the selector to SETUP position.
You can use the
or
buttons to move
quickly from one line to another. The arrow
indicates the line you reached.
Language
Press
until the cursor moves to the
language line. Set the required language
using
or
button. (You may also use
or
buttons to reach the language line.)
Setting Current Time
Press
until the cursor moves below the hour digit. The arrow on the left indicates the line you
reached. Set the hour digit using
or
button.
Press
. The cursor moves to the minutes. Set the minutes using
or
button.
Setting the Date
Press
. The cursor moves to the days. Set the current time using
or
button.
Brightness
Press
. The cursor moves to brightness. Set the desired screen brightness using
or
button.
7
5. PROGRAM A-B-C
5.1 IRRIGATION PROGRAM FOR A GROUP OF VALVES
The Remote offers two valve programming options:
1. Program A, B, C – a common program for a selected number of valves.
2. Independent I program – a separate program for each valve.
Turn the selector to PROGRAM position
5.2 SELECTING A PROGRAM (WEEKLY OR CYCLICAL)
Press
until the cursor moves below the A, B or C program icon.
Use
or
button to select the desired program.
Press
. The cursor moves to On/Off.
Use
or
button to define the On or Off program.
You can stop a program by turning it to on position, even after you programmed it.
At this stage, select weekly or cyclical programming.
Weekly Program
This program sets the days of the week on
which the valves assigned to the program will
operate. Select the desired program (A, B, C)
and then press
. Use
or
button to
select Weekly. You have to select Irrigation
Days for the weekly program.
Press
. The cursor appears under day 1.
Press
. A small triangle appears under the
digit 1 (Monday) is selected as an irrigation day. Press on
, the cursor moves to 2 (Tuesday).
Continue marking the desired days in the same way. To delete selected days, press
.
Cyclical Program
Use this mode to program the remote to
operate the selected program at a fixed
cyclical time. The cycle time can be from
1-30 days. The cycle time is identical for all
the valves assigned to this program.
Select the desired program (A, B, C) and then
press .
Use
or
button to select Cyclic.
Press on
. The cursor appears under days digit.
Use
or
button to set the desired cycle time (in days).
