Dieci Apollo 25.6 Скачать руководство пользователя

Страница: 76 / 235

C/3

ATTENTION

- Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.

EVEry modification madE to thE VEhiclE lEads to a nEw

VErification of conformity with thE 2006/42/Ec machin-

Ery dirEctiVE this procEdUrE is also Valid in thE casE

of rEpairs with non-oriGinal sparE parts.

IT IS prOHIbITED TO OpErATE If THIS mANUAL HAS NOT bEEN rEAD AND

UNDErSTOOD

THE OpErATOr IS rEqUIrED TO LEArN THE LOCATION AND fUNCTION Of ALL

INSTrUmENTS AND CONTrOLS, INDEpENDENT Of HIS Or HEr ExpErIENCE IN

THE fIELD, bEfOrE OpErATING THE VEHICLE

THE ImAGES, DESCrIpTIONS, mEASUrEmENTS STATED IN THIS CHApTEr

rEfEr TO STANDArD VEHICLES

ALL fUNCTIONS AND prOCEDUrES CONCErNING THE OpErATION AND

mOUNTING Of THE VEHICLE’S ATTACHmENTS THAT ArE NOT DESCrIbED IN

THIS mANUAL ArE STrICTLy fOrbIDDEN

USE Of THE VEHICLE DIffErENT TO THAT DESCrIbED IN THIS mANUAL IS

prOHIbITED.

IT IS mANDATOry TO HAVE rEAD AND LEArNED CHApTEr “b“ (SAfETy

STANDArDS) bEfOrE rEADING CHApTEr “C” AND USING THE VEHICLE.

Содержание Apollo 25.6












































































































































































































































Результаты поиска

Содержание Apollo 25.6

Отзывы:

Похожие инструкции для Apollo 25.6

Бренды по названию

Популярные бренды

Dieci Apollo 25.6, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Apollo 25.6

Отзывы:

Похожие инструкции для Apollo 25.6

Бренды по названию

Популярные бренды