Dieci Apollo 25.6, Руководство по эксплуатации и обслуживанию

Страница: 179 / 235

Maintenance and Registering
D/32
Mod. Apollo
- ATTENTION
:
- Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
bOOM SlIDING blOCkS
Greasing
(Fig.60/D)
Boom sliding blocks must be kept lubricated to prevent
deterioration as much as possible and keep movements
smooth.
Extend the boom completely and examine its surface.
In the event that the layer of grease is thin or presents impurities
(sand, dust, shavings, etc.) proceed as follows:
- With the boom completely extended horizontally, remove the
layer of grease from the extension surfaces using a cloth.
- Use a brush to spread a layer of an approved type of
grease on all sides of the telescopic boom.
- Move the boom several times to distribute the grease
evenly.
- Remove any excess grease.
- attEntion -
During the visual check phase and spreading the
grease, the vehicle must be off and the key removed
from the cab to prevent accidental manoeuvres.
- attEntion :
Should the vehicle be used in particularly severe conditions
or very dusty environments lubricate more frequently.
-
attEntion
:
Only use lubricants indicated in diEci tables. Different lubri-
cants may cause serious damage to sliding surfaces.
Sliding block wear
Consult the Summary Table at the start of the chapter for
servicing intervals.
Sliding block wear can cause oscillations and slack between
extensions causing a loss of accuracy in movements and the
risk of load loss. The more difficult the working conditions, the
greater the wear and tear on the vehicle. Boom sliding block
maintenance must be carried out by an authorised workshop.
(fig.60/D)