Dickey-John seed manager, Руководство оператора

Страница: 27 / 71

OPERATOR’S MANUAL
Seed Manager SE
11001-1359A-200810
STARTUP / 25
Figure 16
Setup Mode Parameters
To exit the Setup Mode, press any of the three Operate switches. Exiting
automatically stores the last constant changed.
IMPORTANT:
If the Number of Seed Modules,
Number of Fan Speed Sensors,
Number of Shaft Speed
Sensors, or Number of Pressure
Sensors is set to “0” or another
value below the maximum, the
appropriate subcategory
screens will not display.
Order Setup Mode Default Minimum Maximum
1 Seed Flow 00 00 10
2 Population Hi Limit 0034.0 0000.0 9999.9
3 Population Lo Limit 0026.0 0000.0 9999.9
4 Row Width 030.0 001.0 999.9
5 Implement Width N/A 0001.0 9999.9
6 Ground Speed Source d1 N/A N/A
7 Distance Calibration 6096 250 9999
8 Automatic Configuration N/A N/A N/A
9 Split Row Configuration 00 00 20
10 Number of Seed Modules 1 1 6
10A Number of Seed Sensors Module 1 01 01 16
10B Number of Seed Sensors Module 2 01 01 16
10C Number of Seed Sensors Module 3 01 01 16
10D Number of Seed Sensors Module 4 01 01 16
10E Number of Seed Sensors Module 5 01 01 16
10F Number of Seed Sensors Module 6 01 01 16
11 Row Status ON N/A N/A
12 Total Number of Rows Configured N/A 01 96
13 Number of Fan Speed Sensors 0 0 2
13A Fan Speed Sensor 1 Constant 000.0 000.0 999.99
13B Fan Speed Sensor 1 Hi Limit 00065 00000 99999
13C Fan Speed Sensor 1 Lo Limit 00045 00000 99999
13D Fan Speed Sensor 2 Constant 000.0 000.00 999.99
13E Fan Speed Sensor 2 Hi Limit 00065 00000 99999
13F Fan Speed Sensor 2 Lo Limit 00045 00000 99999
14 Number of Shaft Speed Sensors 0 0 3
14A Shaft Speed Sensor 1 Constant 000.00 000.00 999.99
14B Shaft Speed Sensor 1 Hi Limit 00065 00000 99999
14C Shaft Speed Sensor 1 Lo Limit 00045 00000 99999
14D Shaft Speed Sensor 2 Constant 000.00 000.00 999.99
14E Shaft Speed Sensor 2 Hi Limit 00065 00000 99999
14F Shaft Speed Sensor 2 Lo Limit 00045 00000 99999
14G Shaft Speed Sensor 3 Constant 000.00 000.00 999.99
14H Shaft Speed Sensor 3 Hi Limit 00065 00000 99999
14I Shaft Speed Sensor 3 Lo Limit 00045 00000 99999
15 Number of Hopper Sensors 0 0 7
16 Number of Pressure Sensors 0 0 2
16A Pressure Sensor 1 Hi Limit 000.0 000.0 999.9
16B Pressure Sensor 1 Lo Limit 000.0 000.0 999.9
16C Pressure Sensor 2 Hi Limit 000.0 000.0 999.9
16D Pressure Sensor 2 Lo Limit 000.0 000.0 999.9
17 Blockage Mode Configuration 0 0 2
18 Population Filter 00 00 99
19 Population Scalar 100 001 999
20 Sensor/Module Self-Test N/A N/A N/A
21 English/Metric Units English N/A N/A