Dickey-John Flex4, Руководство оператора

Страница: 21 / 152

OPERATOR’S MANUAL
Figure 12
Attaching Operator Switch Module Bracket and Tablet Mounting Plate
RAM MOUNT BRACKET INSTALLATION
The RAM mount bracket secures the tablet to the vehicle dashboard or
other surface suitable for operator viewing using a RAM mount bracket.
• Ball mount at top and bottom of bracket allows for orientation in many
different positions.
• Wing bolt in middle of bracket tightens and secures the tablet to the
desired position.
Attaching RAM Mount Bracket to Truck Cab :
1. Secure bracket to truck cab using 4 SAE screws (included).
2. Insert ball mount into bracket assembly and tighten wing nut.
3. Adjust tablet for ideal viewing by loosening/tightening the wing nut.
18 / INSTALLATION
Flex4 Pro
TM
Control System
6010541 Rev A
4
Align stud bolts (3) to bracket opening and
Insert Switch Module
Tablet Plate
Switch Module Bracket
5
Connector
opening
6
Hex Nut (3)
Washer (4)
Remove
ball mount
attachment
9
3
Remove screws
8
Attach ball mount
to bracket with (4) screws
1
from plate
2
Align switch module bracket holes
with plate holes and secure
with (4) screws
10
RAM Mount
Bracket
7
Loosen
wing bolt
Position ball mount back to
RAM Mount Bracket and
tighten wing bolt