Patient database
The WPulsePen software manages the patient database called “WPPArch.dbd” which is located in the
“WPulsePen_Data” folder. Selecting the icon
the list of all patients is shown with their registered
exams from which you can choose the one to be displayed on the screen. Patients can also be organized in
various subfolders at the operator's discretion (by type, pathology, ...).
Import and export functions in different formats are also available.
The WPulsePen_LP software records the individual exams on text files (* .txt) contained in the “ASCII”
subfolder of the “WPulsePen_Data” folder.
Support features
The icon
allows you to access the panel which offers the possibility to select the language, format of
date, program devices, etc ...
The icon allows you to access the online Help.
Shutdown
• To turn off the wEc1 and wTn1 Sensors, press and hold the on / off button until you hear a beep (after
about 1 sec in normal mode - about 3 secs in programming mode).
• The wEc1 and wTn1 units turn off automatically when the program is exited or if there is no connection
with the wRs1 unit for more than 30 seconds, for example if the WPulsePen software is not running or
the distance between the units is excessive. The Sensors also turn off automatically if they remain in
standby for more than 10 minutes to preserve the battery: in fact, the stay in standby presupposes no
acquisition of signals during this interval and therefore the inactivity of the Sensors.
The wEc1 and wTn1 units do not transmit radio frequency until the connection with wRs1 is
established.
Maintenance
No particular maintenance operations or periodic calibration of the instrument are necessary.
General Precautions and Warnings
⚠
It is very important to read the following warnings carefully before using the device. Improper use
can have very serious consequences.
• In case of prolonged non-use, remove the batteries from wEc1 / wTn1.
• Before use, the metal disc of the wTn1 probe, the CV010 patient cable and the device casing must be
cleaned with a soft, clean and dry cloth or slightly soaked in alcohol.
• Pay close attention so that alcohol, other liquids and dust do not penetrate inside the wTn1 probe or
other units because this could cause serious problems, irreparably damaging the internal parts.
13
User Manual
PulsePen
- V. 5.0_b
