I
UK
D
E
F
NL
P
S
DK
FIN
B
GR
CZ
EE
LV
LT
H
M
PL
SK
SLO
7
Operator's guide
7. CONTROLS
The appliance is supplied with adjusting controls situated in a protected panel on the front.
1
.
Cover lift
switch:
to open and close the cover - Position II to lift.- Position O to stop.- Position I to lower
2. Light
switch:
to switch on the internal lights
. 3.
Refrigeration unit switch: to switch on the refrigeration unit.
4
.
Thermometer:
to read the temperature in the appliance.
Thermostat:
to adjust the temperature in the
appliance. a) Press button
5 “SET or P”
once to display the temperature set-pint, which can be changed
by pressing button
6 “UP”
or button
7
“DOWN”
(see figure 5).
8. CHECKING CORRECT OPERATION
CHECK THAT: 1.
The plug is connected.
2.
The refrigeration unit switch is switched on (green light ON),
(BRINA models).
3.
The thermometer shows the desired temperature for the goods to be stored, (BRINA
models).
4
. Appliance not exposed to direct sunlight or to high-powered lamps, (BRINA models).
5
. The room temperature does not exceed that in which the appliance is designed to work normally, i.e.
+30°C, 55% r.h. (climatic class 4), (BRINA models).
9. CLEANING THE STAINLESS STEEL SHELF
1.
Wait for the shelf to defrost completely, (BRINA models).
2
. Clean the shelf with a soft sponge and
neutral detergents.
3.
Dry with a clean cloth.
10. REPLACING THE LAMP
1
Switch off the appliance.
2.
Open the cover.
3.
Undo the fastening screws of a lamp socket.
4.
Remove
the lamp socket, whilst holding the fluorescent tube and the transparent protective cover.
5.
Slide the
protective cover out of the other lamp socket.
6
. Replace the fluorescent tube.
7
. Refit everything in the
initial position (see figure 6).
11. ACCESS TO THE MOTOR COMPARTMENT
Simply remove the ventilation grilles to access the motor compartment.
