67
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.6.1
C7LSI – CCS SS7 Link Set Initiate
Synopsis
This command is used to initiate the SS7 link set (LS) between the point code of the unit, the Originating
Point Code (
OPC
), and an adjacent point code, the Destination Point Code (
DPC
). The user should specify the
maximum number of links in the link set (
LSSIZE
), the SS7 Signaling mode (
SS7MD
), which identifies the
point code size and mode of operation, and the Network Context (
NC
) the link set exists within.
See
Section 7.2, “Signaling Configuration” on page 136
for a more detailed description of the SS7 Signaling
configuration.
This command is used to initiate the SS7 link set. Note that the
DPC
(Destination Point Code) is the adjacent
Point Code for the link set.
Syntax
C7LSI:
LS
=,
OPC
=,
DPC
=,
LSSIZE
=,
NI
=,
SS7MD
=,
NC
=,;
Prerequisites
•
The SS7 link set has not already been initiated.
•
The
SS7MD
associated with a
NC
cannot be different to an SS7MD associated with the same NC
anywhere else in the system.
•
The
NC
/
DPC
combination must be different for all link sets.
•
If
SS7MD
indicates 14-bit Point Code,
OPC
and
DPC
must be less than or equal to 16383.
•
If
SS7MD
indicates 16-bit Point Code,
OPC
and
DPC
must be less than or equal to 65535.
•
Only one
OPC
can exist within a network context.
Attributes
CONFIG
Examples
C7LSI:
LS
=1,
NC
=1,
OPC
=1,
DPC
=2,
LSSIZE
=2,
SS7MD
=ITU14,
NI
=0;
