115
Dialogic
®
SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.13.1
SNALI – SIGTRAN Application Server List Initiate
Synopsis
This command attaches a list of SIGTRAN links to an Application Server (AS). The SIGTRAN links provide the
SCTP associations to reach the AS.
See
Section 7.2, “Signaling Configuration” on page 136
for a more detailed description of SIGTRAN signaling
configuration.
Syntax
SNALI:
AS
=,
SEQ
=,
SNLINK
=;
Prerequisites
•
The
AS
has already been initiated.
•
The specified SIGTRAN link has already been initiated.
•
A SIGTRAN link cannot be specified in more than one hunt sequence position for this server.
•
The server/hunt sequence combination must not already be initiated.
•
The SIGTRAN links attached to the server must be M3UA and their peers be able to process ASs (that is,
not act as Signaling Gateways).
•
A
SNLINK
cannot be attached to more than 32 ASs.
•
The
SNTYPE
of the
SNLINK
cannot be M2PA.
Attributes
CONFIG
Examples
SNALI:
AS
=1,
SEQ
=1,
SNLINK
=1;
6.13.2
SNALE – SIGTRAN Application Server List End
Synopsis
This command ends a relationship between an Application Server (AS) and a SIGTRAN link.
Syntax
SNALE:
AS
=,
SEQ
=;
Prerequisites
•
The
AS
sequence combination has already be initiated.
•
The last entry in a list of SIGTRAN links attached to an
AS
cannot be removed unless the
AS
is blocked.
Attributes
CONFIG
Examples
SNALE:
AS
=,
SEQ
=;
