Dialogic PCI Linecard Installation and Replacement
R3B
ã
Aug 2001 Ericsson Enterprise AB
9
Configuring the Default Line State (Hook Switch State)
D/41EPCI and D/120JCT-LS linecards have a configurable default line state (hook switch
state). This setting determines how the linecards will respond to incoming telephone calls
when the OneBox platform is turned on, but either OneBox or the Dialogic System
Software is not running.
•
If the switch is in the OFF position, the default line state is
onhook
; callers will get a
ring-no-answer (RNA) response.
•
If the switch is in the ON position, the default line state is
offhook
; callers will get a
busy signal.
Note
If the computer platform is turned off, callers will get an RNA response.
To set the default line state:
•
Set the default line state of the linecard to
offhook
.
If you are preparing a…
Then…
D/41EPCI
Flip the SW2 switch position 1 to the ON position.
D/120JCT-LS
Flip the SW1 switch position 1 to the ON position.
D/240PCI-T1
No configuration is necessary. The default line state for
these cards is
offhook
.
