Dialogic PCI Linecard Installation and Replacement
R3B
ã
Aug 2001 Ericsson Enterprise AB
7
IMPORTANT
Do
not
configure any Dialogic PCI linecard to linecard identification number 0. We do not support
the automatic linecard identification number assignment scheme for PCI linecards (called
Geographic Sequencing by Dialogic).
To set the linecard identification number:
•
Dial the rotary switch to select a unique linecard identification number, as shown in
the example in Figure 4.
For the location of the rotary switch, refer to:
- Figure 1 if you are installing a D/41EPCI (SW1)
- Figure 2 if you are installing a D/120JCT-LS (SW100)
- Figure 3 if you are installing a D/240PCI-TI (SW1)
Figure 4. A rotary switch
set to linecard ID 3
3
