Dialogic PCI Linecard Installation and Replacement
R3B
ã
Aug 2001 Ericsson Enterprise AB
15
D/41EPCI linecards use RJ-11 connectors to interface with the telephone system.
Depending on the type of linecord your local public telephone network uses, you may
need linecord adapters to connect the computer platform. For example, we ship each
Dialogic D/41EPCI linecard sold in North America with two RJ-11–to–RJ-14 linecord
adapters (shown in Figure 8). These adapters allow you to connect the RJ-11 single-
channel connectors at the back of the D/41EPCI to a two-channel RJ-14 linecord. If
linecord adapters are required and not included with the linecards, please contact your
technical service representative.
Figure 8. RJ-11
–
to
–
RJ-14 linecord adapter
To cable D/41EPCI linecards:
•
Plug the linecords (jacks) from the telephone system to the RJ-11 connectors on the
D/41EPCI (refer to the line assignment diagram shown in Figure 7).
–or–
If the linecords from the telephone system do not use RJ-11 connectors, plug the
linecords into the appropriate linecord adapter, then plug the RJ-11 linecord(s) of the
adapter into the RJ-11 connectors on the D/41EPCI.
RJ-14 connector
RJ-11 cable
RJ-11 cable
