Dialogic PCI Linecard Installation and Replacement
R3B
ã
Aug 2001 Ericsson Enterprise AB
12
4.
From the Service menu, point to Startup Mode, and select
Manual
.
5.
From the File menu, select
Exit
.
6.
Shut down the operating system.
7.
Turn off the computer, unplug its power cord, and remove its cover.
8.
Select a PCI expansion slot.
If the linecard…
Then…
Replaces an existing linecard
Remove the existing linecard from the PCI
expansion bus slot and use this expansion slot
for the replacement linecard.
Adds ports to the OneBox platform
Select an empty PCI expansion bus slot that
will be assigned IRQ 5 and remove its
retaining screw and cover plate.
9.
Insert the linecard into the PCI bus slot. Gently press the linecard down to seat the
edge connector into the slot, applying pressure only to the top edge of the board.
Rocking the card or applying excess pressure may damage the card or the bus
connector.
10.
Secure the card with the appropriate retaining screw or a locking clip.
Note
If you do not secure the card, you can unseat it from the slot when you attach
the CTbus cable later in the installation process.
Select
Manual
