Dialogic PCI Linecard Installation and Replacement
R3B
ã
Aug 2001 Ericsson Enterprise AB
29
Installing Service Pack 1 for DNA Version 3.3 (D/120JCT-LS Only)
To ensure that the D/120JCT-LS linecard functions appropriately with the telephony
server software, you must install Dialogic’s Service Pack 1 for its DNA System Software
version 3.3 immediately after you install DNA 3.3 itself. We include a CD-ROM
containing Service Pack 1 for DNA version 3.3 with each D/120JCT-LS linecard we ship.
If you are not installing D/120JCT-LS linecards or not using DNS 3.3, please proceed to
the next section, “Configuring Dialogic PCI Linecards in Dialogic Configuration
Manager.”
To install Service Pack 1 for DNA version 3.3:
1.
Make sure that the telephony server is stopped and that none of its administrative
utilities are running.
2.
Insert the Service Pack 1 CD-ROM into the CD-ROM drive of the server platform
containing the D/120JCT-LS linecard.
3.
From the Start menu, select
Run
.
4.
Click
Browse
on the Dialogic CD-ROM and locate the file Setup.exe.
5.
Click
Setup.exe
, then click
Open
.
6.
When you return to the Run dialog box, click
OK
.
7.
At the Welcome dialog box, read the warnings shown and click
Next
. The setup
program makes backup copies of certain previously installed files and copies updated
versions of those files from the CD-ROM.
8.
In the first Information dialog box, click
OK
.
9.
In the second Information dialog box, note that you must now restart the platform; the
setup program does not restart it automatically. To exit the setup program, click
OK
.
10.
Shut down and restart the platform.
