DHS Systems TM 95263 00, Руководство по эксплуатации и обслуживанию

Страница: 49 / 132

DHS Systems, LLC TM 95236-00 0005
0005-1
No rights are conveyed except as indicated in the legend on the cover of this document.
OPERATOR INSTRUCTIONS
AVCS (MINI)
SET-UP PROCEDURES
GENERAL
The following WP details the assembly of the AVCS (MINI) system.
This system provides the flexibility to connect whatever devices will best support the mission of the unit. The
commander should make an assessment of the current mission prior to set-up and determine what input and
output devices are to be used. This WP will address the individual connections and procedures for general set-
up.
SITE REQUIREMENTS
To ensure minimal problems and good operation of AVCS (MINI), ensure that area is:
•
Dry
•
Level with adequate room AVCS (MINI) and all associated equipment
•
Free of items that would cause physical interference with setting up the
AVCS (MINI)
INITIAL ADJUSTMENTS, CHECKS, AND SELF TEST
Conduct a thorough inventory of all components and a complete PMCS before assembling the AVCS (MINI)
System.
PREPARATION AND SET-UP OF THE AVCS (MINI)
Perform all PMCS procedures before setting up the AVCS (MINI) equipment IAW the procedures in WP 0019.
Tent Requirements and Setup
Procedures for tent power, lighting, grounding and setup can be found in the technical manual that is applicable to
the model of tent, power source, and ground source being used and will not be addressed in this manual unless it
specifically applies to the setup of the AVCS (MINI).
Grounding Requirements
It is necessary to ground the AVCS (MINI) and any ancillary equipment to the power source. The ground
connection is made during set-up procedures for the system. DO NOT remove the ground until instructed to do
so to prevent damage to sensitive equipment.
Power Requirements and Setup
The AVCS (MINI) requires 110VAC power from a power distribution box or other power supply. This manual will
address set-up procedures for a standard 110VAC power source as normal operating procedures. All power
connections will be addressed as part of the AVCS (MINI) set-up.