DHS Systems TM 95263 00, Руководство по эксплуатации и обслуживанию

Страница: 120 / 132

DHS Systems, LLC TM 95236-00 0016
0016-4
No rights are conveyed except as indicated in the legend on the cover of this document.
CLEANING THE AVCS (MINI) CABLES
INITIAL SETUP:
Tools and Special Tools References
Sponge/Rag/paper towels
Materials/Parts Equipment Condition
Water Equipment Powered Down
De-natured Alcohol Power Source Disconnected
Cable Ties
WARNING
Voltage sources, in addition to being an electrical shock hazard, may also potentially produce
serious burns. Care should be exercised when using water around exposed power
connections. Ensure that all power to the system has been shut off before disassembling and
cleaning the components of the AVCS (MINI).
C AUTION
Use of a damp cloth is authorized for cleaning the case and cables but care should be
exercised to ensure that water does not get into the connection of the cables or the electrical
components. Damage or corrosion may result from water contamination, if water gets into
the connections, blow the connections out with compressed air, or allow to air dry before
connecting back to equipment.
SERVICE
1. Verify that the AVCS (MINI) has been shut down and the power source has been disconnected.
2. Disconnect all cables from the AVSC and accessory devices.
3. Inspect all cables for damaged wiring or connectors.
4. Clean the body of the wiring using a damp lint free cloth.
5. Use compressed air to clean dust and debris from the ends of the connections.
6. Replace all dust covers on cable ends.
7. If storing roll cables and secure with cable ties to prevent tangling of cables when stored.
8. Store or reconnect cables as needed.
END OF TASK