DHS Systems TM 95263 00, Руководство по эксплуатации и обслуживанию

Страница: 76 / 132

DHS Systems, LLC TM 95236-00 0006
0006-14
No rights are conveyed except as indicated in the legend on the cover of this document.
Configure AVCS (MINI) IP
1. Press and release the
Controller button (Figure 14, Item 1) to access the Controller Panel.
2. Locate the Configuration windows (Figure 14, Item 2) on the left side of the Controller Panel.
3. Press the IP Address display box (Figure 14, Item 3) to access IP number.
4. Use the numeric touch pad (Figure 14, Item 6) in the center of the Controller Panel to type in new IP address.
5. Use the Back Space button to back up and retype if you make a mistake while typing the address.
6. Repeat steps three through five to enter the Subnet Mask (Figure 14, Item 4) and Default Router (Figure 21,
Item 5) addresses if desired.
7. Press the Save & Reboot button (Figure 14, Item 7). The system will prompt (Figure 14, Item 8) for
confirmation to reboot. Press the Yes button (Figure 14, Item 9) to reboot. Press the No button to cancel the
reboot and the new addresses will not be initialized.
8. if proceeding with Yes, to Save & Reboot, press the Controller button (Figure 1, Item 1) after the AVCS
reboots to access the Controller Panel and verify the new addresses are correct.
Figure 14. Access & Modify System Information.
END OF TASK