DHS Systems TM 95263 00, Руководство по эксплуатации и обслуживанию

Страница: 53 / 132

DHS Systems, LLC TM 95236-00 0005
0005-5
No rights are conveyed except as indicated in the legend on the cover of this document.
SET-UP AND CONNECT AUDIO INPUT DEVICES
Available Devices
Audio input can be achieved through various devices. The system will accept two analog microphone inputs and two
analog line inputs. The system will attach to any audio device which has a line level audio output. An adapter cable
may be required. These devices include, but are not limited to, the following:
•
Audio MIC Input
o
Hand Held Microphone
o
Table top Microphone
o
Wireless Microphone
•
Audio Line Input
o
Lap Top Computer
o
DVD/CD player
o
Satellite Receiver
o
VTC CODEC
NOTE
If using a microphone for input use the connector(s) marked ‘MIC’, if using a line audio input device,
such as a computer or satellite receiver, use the connector(s) marked ‘LINE”. A microphone is not
provided with the AVCS (MINI) system.
1. Identify the type and amount of analog audio input devices that will be used.
2. Position the audio input device in its desired location.
3. If necessary, select the appropriate audio adaptor from the ancillary equipment case and connect it to the RCA
jacks on the XLR audio cable provided with the system. An adapter or adapter cable may be required as there
are several types of microphone and line level audio connectors.
4. Connect an XLR audio cable from a suitable audio output device to either AUDIO IN LINE A or LINE B (Figure 4,
Item 1).
5. Connect an XLR audio cable from a microphone to either AUDIO IN MIC 1 or MIC 2 (Figure 4, Item 2).
6. Route the XLR audio cable so that it does not interfere with the traffic flow in the area.
RGB 1 RGB 2
VIDEO OUT
RGB 1
RGB3
RGB2 RGB4
CV1
CV2
GND.
110AC ONLY
INPUTONLY
EXTERNAL
DEVICE
CTL. IPRESET
CTL.L AN TOUCHPANEL POTSLINE
PROT ECTI ON
LINEA SPEAKER
AUDI O OUT CO NTROL
VIDEO IN
AUDIO IN
WEIGHT RANGE
80- 100 LBS.
HA RDI GG
FAUL T PRESE NT
LINE
OK
isobar
LINE 1
LINE2
MIC 2
MIC 1
MIC 1 LINE A
AUDIO IN
MIC 2 LINE B
1
3
2
PUSH
1
3
2
PUSH
1
3
2
PUSH
1
3
2
PUSH
XLR
L
R
VCR
OUT
OUT
1
2
Figure 4. AUDIO IN connectors.