Dhollandia DH-RP.10 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 76

Dhollandia DH-RP.10 Скачать руководство пользователя страница 52

51

DHOLLANDIA

18

DECALS

18.1

REGULAR DECALS

1.

The following decals are supplied with each new tail lift and should be affixed to the vehicle body during installation in the manner
set forth in the adjacent drawings.

2.

NEVER remove or paint over any decal. Missing, worn or illegible warning decals MUST be immediately replaced. Get free
replacement decals from DHOLLANDIA. Contact your regional DHOLLANDIA distributor. See page 4 for contact info.

3.

The operator should comply with all affixed safety and instructions decals. Be aware that the decals merely summarize the main
points, and that the operator MUST know, understand, and comply with the full contents of the operation manual.

4.

Note: the decals marked as “EXAMPLE” can vary in function of the maximum rated capacity of the tail lift, or the chosen type of
external control box.

The following decals are supplied with each new tail lift, and should be affixed to the vehicle body during installation in the manner set forth in the adjacent drawing

NOTICE

Remove any unwanted debris or residue from surfaces before installing any of the decals to ensure proper adhesion.

❼

❼

«
...
50
51
52
53
54
...
»

Содержание DH-RP.10













































































Отзывы:

Нет отзывов