Dhollandia DH-RP.10, Руководство по установке, Страница: 42 / 76

41
DHOLLANDIA
13 PUTTING THE TAIL LIFT INTO SERVICE

Remove the mounting bar from between the lift arms and the lift frame (used to install lift at pre-defined mounting height MFT).
[Figure 13.1]
 Switch on the main electrical power to the tail lift.

Push the LIFT button to pressurize the hydraulic system. Stop when you hear the hydraulic pump turn in overpressure.
Figure 13.1
NOTICE
Check for visible leaks of hydraulic oil as the system is being pressurized. If there is leakage, correct the problem prior to continuing.
WARNING

Improper use of the tail lift will put the operator at great risk of serious bodily injury and death. If in doubt how to use tail lift
correctly, installer should consult the operation manual prior to continuing

Air might be trapped in the hydraulic circuits, as long as the tail lift has not been bled. Air can cause the tail lift to make
unexpected movements and can put the installer at great risk of serious bodily injury. The installer should remain vigilant and
stay out of the range of motion of the platform and the moving parts of the tail lift as long as the hydraulic circuits have not
been purged.