Dhollandia DH-RP.10, Руководство по установке, Страница: 15 / 76

14
DHOLLANDIA

Do not pressurize any tail lift functions (LIFT / LOWER) before the tail lift installation is fully finished.

During installation and while testing, verify that the tail lift and its moving parts don’t interfere with, or cause damage to the vehicle
systems (e.g. to suspension, braking system, hydraulic and electrical circuits, etc.).
6.4 INSTALLATION DIMENSIONS

The DH-RP10.02 are usually delivered with a premounted mounting bar between the lift arms and lift frame, pre-setting the
mounting height MFT = 445mm. [Figure 6.4].
Figure 6.4 shows:
1. the required overhang LOF / LOP
2. the min. vehicle floor height VFH MIN. and corresponding ground clearance MPG
3. The max. vehicle floor height VFH MAX. and corresponding ground clearance MPG

Before starting the installation, verify if the actual floor height VFH of the vehicle falls within the given min. and max. range VFH
MIN < VFH < VFH MAX.

The max. floor height VFH MAX. should be measured for an UNLOADED vehicle (= worst case)

The min. floor height VFH MIN. should be measured for a FULLY LOADED vehicle (= worst case)
Figure 6.4
VF
H
M
AX
VF
H M
IN
MFT
MTG