Dhollandia DH-RP.10, Руководство по установке, Страница: 23 / 76

22
DHOLLANDIA

Mount the mounting plates on the lift frame and tighten the bolts by hand. [Figure 9.3]

Each mounting plate is bolted to the lift frame by means of [Figure 9.3]:
1. Fit the mounting plate over the frame [1]
2. Fit the clamps over the designated screw threads of the mounting plates. [2]
3. Place the self-locking nuts M24 over the screw threads of the mounting plates and hand tighten them. [3]
Figure 9.3
See also

Slide the mounting plates outward as much as possible, to obtain max. clearance when raising the lift frame over the vehicle
chassis.

Clamp 2 lengths of tube or angle brackets, min. 76mm
2
x 4mm) wall thickness or equivalent, to the extension plate with min.
500mm overhang. These brackets will help align the platform with the extension plate. [Figure 9.4].

Install a min. 136kg counter weight on the channels to prevent them from moving during installation. Or tack-weld the brackets
temporarily to the rear sill and floor of the vehicle.
Per side
2x M24x2 (10.9) hand tightened
❶
❷ ❸
❸