Dhollandia DH-RP.10, Руководство по установке, Страница: 49 / 76

48
DHOLLANDIA
16 LUBRICATION INSTRUCTIONS

All articulation points equipped with lube fittings should be lubricated after installation (pictured on the following page), and once
in service with intervals as indicated in the maintenance manual.

Use a grease gun to pump grease in the lube fittings, until a grease collar is formed on both sides of the bearing or articulation,
protecting it against ingress of water, salt, sand and dirt.

Note that the grease nipple might be located in the pin itself, or in the larger assembly that pivots around the pin.

In case a pin has 2 grease nipples, grease both sides.

Ensure all lube fittings function correctly and replace any defective fittings.

ALWAYS use acid-free grease. The use of graphite grease is not allowed.

If so equipped, verify if the platform lock operates smoothly, and lubricate with oil if necessary.
NOTICE
To maximize the durability and operational reliability of the tail lift, it is important to lubricate the pivot points thoroughly after
installation.